Skip to main content

Genesis Document

A genesis document contains the initial state of an Oasis Network, and all the necessary information for launching that particular network (i.g. [Mainnet], [Testnet]).

info

For a more in-depth explanation of the genesis document, see the Genesis Document part of Oasis Core's developer documentation.

The important thing to note is that the genesis document is used to compute the genesis document's hash. This hash is used to verify for which network a given transaction is intended for.

Genesis File vs. Genesis Document​

A genesis file is a JSON file corresponding to a serialized genesis document. As such, it is more convenient for distribution and sharing.

When Oasis Node loads a genesis file, it converts it to a genesis document.

info

Up to date information about the current genesis file and the current genesis document's hash can be found on the Network Parameters page (Mainnet, Testnet).

Parameters​

This sections explains some of the key parameters of the genesis document.

caution

The concrete parameter values in the following sections pertain to the Mainnet. Other Oasis networks (e.g. Testnet) might use different values.

danger

The token balances in a genesis document (or a genesis file) are enumerated in base units.

The staking.token_value_exponent parameter defines the token value's base-10 exponent. For the Mainnet it is set to 9 which means 1 ROSE equals 10^9 (i.e. billion) base units.

Height, Genesis Time and Chain ID​

The height parameter specifies the network's initial block height. When a network is upgraded, its height is retained. For example, for the Cobalt upgrade the height of the Mainnet state dump was bumped by 1 from 3,027,600 to 3,027,601.

The genesis_time parameter is an ISO8601 UTC timestamp that specifies when the network is officially going to launch. At the time of genesis, validators are expected to come online and start participating in the consensus process for operating the network. The network starts once validators representing more than 2/3 of stake in the initial consensus committee are online.

The chain_id is a human-readable version identifier for a network.

caution

It is important to note that this value alone doesn't dictate the version of an Oasis network. Rather, the hash of the whole genesis document, i.e. the genesis document's hash, is the network's unique identifier.

Registry​

Within the registry object, there are a broad range of parameters that specify the initial set of node operators and their corresponding initial node statuses.

  • registry.params.max_node_expiration The maximum duration (in epochs) that node registrations last. The starting value is set to 2 in order to ensure that a node is continuously online, since the node’s registration would expire each time 2 epochs pass, requiring the node to re-register.

  • registry.params.enable_runtime_governance_models The set of runtime governance models that are allowed to be used when creating/updating registrations. It is set to {"entity": true, "runtime": true} which means a runtime can choose between entity governance and runtime-defined governance.

  • registry.entities The entity registrations for initial node operators, including public key and signature information.

  • registry.runtimes The initial runtime registrations. Each item describes a runtime's operational parameters, including its identifier, kind, admission policy, committee scheduling, storage, governance model, etc. For a full description of the runtime descriptor see the Runtime structure documentation.

  • registry.suspended_runtimes The initial suspended runtime registrations. Each item describes a suspended runtime's operational parameters, including its identifier, kind, admission policy, committee scheduling, storage, governance model, etc. For a full description of the runtime descriptor see the Runtime structure documentation.

  • registry.nodes The node registrations for initial node operators, including public key and signature information.

info

For a new network, the entity and node registrations are obtained via the entity package collection process (e.g. Mainnet Network Entities).

For an upgrade to an existing network, the network's state dump tool captures the network's current entity and node registrations.

Gas Costs​

The following parameters define the gas costs for various types of transactions on the network:

  • staking.params.gas_costs.add_escrow The cost for an add escrow (i.e. stake tokens) transaction. The value is set to 1000.
  • staking.params.gas_costs.burn The cost for a burn (i.e. destroy tokens) transaction. The value is set to 1000.
  • staking.params.gas_costs.reclaim_escrow The cost for a reclaim escrow transaction (i.e. unstake tokens). The value is set to 1000.
  • staking.params.gas_costs.transfer The cost for a transfer transaction. The value is set to 1000.
  • staking.params.gas_costs.amend_commission_schedule The cost for amending, or changing, a commission schedule. The value is set to 1000.
  • registry.params.gas_costs.deregister_entity The cost for a deregister entity transaction. The value is set to 1000.
  • registry.params.gas_costs.register_entity The cost for a register entity transaction. The value is set to 1000.
  • registry.params.gas_costs.register_node The cost for a register node transaction. The value is set to 1000.
  • registry.params.gas_costs.register_runtime The cost for a register ParaTime transaction. The value is set to 1000.
  • registry.params.gas_costs.runtime_epoch_maintenance The cost of a maintenance fee that a node that is registered for a ParaTime pays each epoch. The value is set to 1000.
  • registry.params.gas_costs.unfreeze_node The cost for unfreeze node (i.e. after the node is slashed and frozen) transaction. The current value is 1000.
  • keymanager.params.gas_costs.publish_ephemeral_secret The cost for keymanager ephemeral secret publication transaction. The value is set to 1000.
  • keymanager.params.gas_costs.publish_master_secret The cost for keymanager master secret publication transaction. The value is set to 1000.
  • keymanager.params.gas_costs.update_policy The cost for keymanager update policy transaction. The value is set to 1000.
  • roothash.params.gas_costs.compute_commit The cost for a ParaTime compute commitment transaction. The value is set to 10000.
caution

In addition to the gas costs specified above, each transaction also incurs a cost proportional to its size.

The consensus.params.gas_costs.tx_byte parameter specifies the additional gas cost for each byte of a transaction. The value is set to 1.

For example, a staking transfer transaction of size 230 bytes would have a total gas cost of 1000 + 230.

Root Hash​

The roothash object contains parameters related to the Root Hash service and minimal state related to runtimes.

  • roothash.params.max_runtime_messages The global limit on the number of messages that can be emitted in each round by the runtime. The value is set to 256.

  • roothash.params.max_evidence_age The maximum age (in the number of rounds) of submitted evidence for compute node slashing. The value is set to 100.

Staking​

The staking object contains parameters controlling the Staking service and all state related to accounts, delegations, special pools of tokens...

Token Supply & Ledger​

The following parameters specify the total token supply, total token pool reserved for staking rewards, and account balances across the network at the time of genesis:

  • staking.total_supply The total token supply (in base units) for the network. This is fixed at 10 billion ROSE tokens (the value is set to 10,000,000,000,000,000,000 base units).

  • staking.common_pool The tokens (in base units) reserved for staking rewards to be paid out over time.

  • staking.governance_deposits The tokens (in base units) collected from governance proposal deposits.

  • staking.ledger The staking ledger, encoding all accounts and corresponding account balances on the network at the time of genesis, including accounts for initial operators, backers, custodial wallets, etc.

  • staking.delegations The encoding of the initial delegations at the time of genesis.

info

Interpreting your account balance in the staking.ledger

Your account's general.balance includes all of your tokens that have not been staked or delegated. Within your account's escrow field, the active.balance holds the total amount of tokens are (actively) delegated to you.

Delegations​

The following parameters control how delegations behave on the network:

  • staking.params.debonding_interval The period of time (in epochs) that must pass before staked or delegated tokens that are requested to be withdrawn are returned to the account's general balance. The value is set to 336 epochs, which is expected to be approximately 14 days.
  • staking.params.min_delegation The minimum amount of tokens one can delegate. The value is set to 100,000,000,000 base units, or 100 ROSE tokens.
  • staking.params.allow_escrow_messages Indicator whether to enable support for AddEscrow and ReclaimEscrow runtime messages. The value is set to true.

Node & ParaTime Token Thresholds​

There are several staking.params.thresholds parameters that specify the minimum number of tokens that need to be staked in order for a particular entity or a particular type of node to participate in the network.

The entity, node-compute, node-keymanager, and node-validator parameters are set to 100,000,000,000 base units for each, indicating that you need to stake at least 100 ROSE tokens in order to have your entity or any of the specified nodes go live on the network.

The staking.params.thresholds parameters also specify the minimum thresholds for registering new ParaTimes. The runtime-compute and runtime-keymanager parameters are set to 50,000,000,000,000 base units, indicating that you need to stake at least 50,000 ROSE tokens in order to register a compute/key manager ParaTime.

Rewards​

The following parameters control the staking rewards on the network:

  • staking.params.reward_schedule The staking reward schedule, indicating how the staking reward rate changes over time, defined at an epoch-by-epoch granular basis. The reward schedule uses a tapering formula with higher rewards being paid out at earlier epochs and then gradually decreasing over time. For more details, see the Staking Incentives doc.
  • staking.params.signing_reward_threshold_numerator and staking.params.signing_reward_threshold_denominator These parameters define the proportion of blocks that a validator must sign during each epoch to receive staking rewards. The set fraction of 3/4 means that a validator must maintain an uptime of at least 75% blocks during an epoch in order to receive staking rewards for that period.
  • staking.params.fee_split_weight_propose The block proposer's share of transaction fees. The value is set to 2.
  • staking.params.fee_split_weight_next_propose The next block proposer's share of transaction fees. The value is set to 1.
  • staking.params.fee_split_weight_vote The block signer’s/voter’s share of transaction fees. The value is set to 1.
  • staking.params.reward_factor_epoch_signed The factor for rewards distributed to validators who signed at least threshold blocks in a given epoch. The value is set to 1.
  • staking.params.reward_factor_block_proposed The factor for rewards earned for block proposal. The value is set to 0, indicating validators get no extra staking rewards for proposing a block.

Commission Schedule​

The following parameters control how commission rates and bounds can be defined and changed:

  • staking.params.commision_schedule_rules.rate_change_interval The time interval (in epochs) at which rate changes can be specified in a commission schedule. The value is set to 1 indicating that the commission rate can change on every epoch.

  • staking.params.commision_schedule_rules.rate_bound_lead The minimum lead time (in epochs) needed for changes to commission rate bounds. This is set to protect the delegators from unexpected changes in an operator's commission rates. The value is set to 336, which is expected to be approximately 14 days.

  • staking.params.commision_schedule_rules.max_rate_steps The maximum number of rate step changes in a commission schedule. The value is set to 10, indicating that the commission schedule can have a maximum of 10 rate steps.

  • staking.params.commision_schedule_rules.max_bound_steps The maximum number of commission rate bound step changes in the commission schedule. The value is set to 10, indicating that the commission schedule can have a maximum of 10 rate bound steps.

Slashing​

These parameters specify key values for the network's slashing mechanism:

  • staking.params.slashing.consensus-equivocation.amount The amount of tokens to slash for equivocation (i.e. double signing). The value is set to 100,000,000,000 base units, or 100 ROSE tokens.

  • staking.params.slashing.consensus-equivocation.freeze_interval The duration (in epochs) for which a node that has been slashed for equivocation is “frozen,” or barred from participating in the network's consensus committee. The value of 18446744073709551615 (the maximum value for a 64-bit unsigned integer) means that any node slashed for equivocation is, in effect, permanently banned from the network.

  • staking.params.slashing.consensus-light-client-attack.amount The amount of tokens to slash for light client attack. The value is set to 100,000,000,000 base units, or 100 ROSE tokens.

  • staking.params.slashing.consensus-light-client-attack.freeze_interval The duration (in epochs) for which a node that has been slashed for light client attack is “frozen,” or barred from participating in the network's consensus committee. The value of 18446744073709551615 (the maximum value for a 64-bit unsigned integer) means that any node slashed for light client attack is, in effect, permanently banned from the network.

Committee Scheduler​

The scheduler object contains parameters controlling how various committees (validator, compute, key manager) are periodically scheduled.

  • scheduler.params.min_validators The minimum size for the consensus committee. The value is set to 15 validators.

  • scheduler.params.max_validators The maximum size for the consensus committee. The value is set to 100 validators.

  • scheduler.params.max_validators_per_entity The maximum number of nodes from a given entity that can be in the consensus committee at any time. The value is set to 1.

Random Beacon​

The beacon object contains parameters controlling the network's random beacon.

  • beacon.base Network's starting epoch. When a network is upgraded, its epoch is retained. For example, for the Cobalt upgrade the epoch of the Mainnet state dump was bumped by 1 from 5,046 to 5,047.

  • beacon.params.backend The random beacon backend to use. The value is set to "vrf" indicating that the beacon implementing a VRF (verifiable random function) should be used.

VRF Beacon​

These parameters control the behavior of the VRF random beacon:

  • beacon.params.vrf_parameters.alpha_hq_threshold The minimum number of proofs that must be received for the next input to be considered high quality. If the VRF input is not high quality, runtimes will be disabled for the next epoch. The value is set to 20.

  • beacon.params.vrf_parameters.interval The epoch interval in blocks. The value is set to 600 blocks, which is expected to be approximately 1 hour.

  • beacon.params.vrf_parameters.proof_delay The wait period in blocks after an epoch transition that nodes must wait before attempting to submit a VRF proof for the next epoch's elections. The value is set to 400 blocks.

Governance​

The governance object contains parameters controlling the network's on-chain governance introduced in the Cobalt upgrade:

  • governance.params.min_proposal_deposit The amount of tokens (in base units) that are deposited when creating a new proposal. The value is set to 10,000,000,000,000 base units, or 10,000 ROSE tokens.

  • governance.params.voting_period The number of epochs after which the voting for a proposal is closed and the votes are tallied. The value is set to 168, which is expected to be approximately 7 days.

  • governance.params.stake_threshold The percentage of VoteYes votes in terms of total voting power for a governance proposal to pass. The value is set to 68 (i.e. 68%).

  • governance.params.upgrade_min_epoch_diff The minimum number of epochs between the current epoch and the proposed upgrade epoch for the upgrade proposal to be valid. Additionally, it specifies the minimum number of epochs between two consecutive pending upgrades.

    The value is set to 336, which is expected to be approximately 14 days.

  • governance.params.upgrade_cancel_min_epoch_diff The minimum number of epochs between the current epoch and the proposed upgrade epoch for the upgrade cancellation proposal to be valid. The value is set to 192, which is expected to be approximately 8 days.

Consensus​

The following parameters are used to define key values for the network's consensus protocol:

  • consensus.backend Defines the backend consensus protocol. The value is set to "tendermint" indicating that the Tendermint BFT protocol is used.

  • consensus.params.timeout_commit Specifies how long to wait (in nanoseconds) after committing a block before starting a new block height (this affects the block interval). The value is set to 5,000,000,000 nanoseconds, or 5 seconds.

  • consensus.params.max_tx_size Maximum size (in bytes) for consensus-layer transactions. The value is set to 32,768 bytes, or 32 kB.

  • consensus.params.max_block_size Maximum block size (in bytes). The value is set to 22,020,096 bytes, or 22 MB.

  • consensus.params.max_block_gas Maximum block gas. The value is set to 0, which specifies an unlimited amount of gas.

  • consensus.params.max_evidence_size Maximum evidence size (in bytes). The value is set to 51,200 bytes, or 50 kB.

  • consensus.params.public_key_blacklist A list of the public keys that cannot be used on the network. Currently, there are no blacklisted public keys.

  • consensus.params.state_checkpoint_interval The interval (in blocks) on which state checkpoints should be taken. The value is set to 10000.

  • consensus.params.state_checkpoint_num_kept The number of past state checkpoints to keep. The value is set to 2.

  • consensus.params.state_checkpoint_chunk_size The chunk size (in bytes) that should be used when creating state checkpoints. The value is set to 8,388,608 bytes, or 8 MB.